8
AVAILABLE 208/240V MODELS
2.4 AVAILABLE MODELS
Notes:
• J Voltage (208/240V) single phase air handler is designed to be used with single or
three phase 208/240V power. When connecting 3-phase power to the air handler ter-
minal block, bring only two leads to the terminal block. Cap, insulate and fully secure
the third lead.
• The air handlers are shipped from the factory with the proper indoor coil installed, and
cannot be ordered without a coil.
• These air handlers do not have an internal lter rack. An external lter rack or other
means of ltration of return air is required.
• Electric resistance heaters are eld installed items. (See Section 6.1)
DRAH1TA2417ASTNJA
DRAH1TA3617ASTNJA
DRAH1TA3621AHTNJA
DRAH1TA3621AMTNJA
DRAH1TA4821AMTNJA
DRAH1TA4821ASTNJA
DRAH1TA6021ASTNJA
DRAH1TA6024ASTNJA
To Next Page
Loading...
