Need help?Do you have a question about the Duratool D03126 and is the answer not in the manual?
General| Model | D03126 |
|---|---|
| Display Type | LCD |
| Display Digits | 3.5 |
| Diode Test | Yes |
| Continuity Test | Yes |
| Continuity Buzzer | Yes |
| Battery Type | 9V |
| Safety Rating | CAT II 600V |
| Data Hold | Yes |
| DC Current Range | 200μA/2000μA/20mA/200mA/10A |
| Resistance Range | 200Ω to 2MΩ |
Explains key safety symbols like high voltage, ground, and double insulation.
Outlines essential safety practices for using electrical measurement equipment.
Lists items provided with the multimeter, including manual, leads, battery, and optional holster.
Details the LCD display and the function of the backlight button.
Describes the rotary switch for function selection and the input jacks (VΩmA, COM, 10A).
Explains the operation of the 'Hold' button for freezing readings.
Covers max voltage, fuse, power, display, environment, and storage details.
Details the ranges, resolutions, and accuracies for DC voltage measurements.
Details the ranges, resolutions, and accuracies for DC current measurements.
Details AC voltage measurement ranges, resolution, and accuracy.
Explains how to perform continuity and diode tests with the multimeter.
Details resistance measurement ranges, resolution, and accuracy.
Specifies test range, current, and voltage for transistor hFE testing.
Step-by-step guide for measuring DC voltage and current.
Instructions for performing AC voltage measurements.
Guides for resistance measurement and diode testing procedures.
How to perform transistor hFE tests using the multimeter.
Steps for using the audible continuity test feature.
Instructions for safely replacing the battery and fuse.
Guidelines for cleaning the multimeter to maintain its condition.
To Next Page