305 mm
12"
½"
⅞"
½"
⅞"
> Install tank bolts and washers.
> Inspect product for any potential
damage that may have occurred
during transport.
> Do not install if any damage is
visible.
> Remove tank lid to prevent
damage during installation.
> Identify supply line for desired
market.
> Install adapter if required.
> Install shut-off valve and closet
flange according to instructions.
> Attach water supply line and
rubber gasket.
> Insure that all connections are
securely sealed.
6 MAL_57311/22.1.4
en
1
4
2
5
3
6
To Next Page
Loading...
Need help?
General