DURAVIT SensoWash Starck f Plus

Questions and Answers

A
Amy FloresSep 3, 2025
What to do if there is water leakage on DURAVIT SensoWash Starck f Plus?
- A
  Aaron Diaz DDSSep 4, 2025
  If you notice water leakage from your DURAVIT Toilets, close the main valve for the water supply, disconnect the power supply, and contact help@duravit.com.
K
Kathy NicholsSep 18, 2025
Why is the app not working with my DURAVIT SensoWash Starck f Plus Toilets?
- J
  justinpattersonSep 18, 2025
  If the app does not work with your DURAVIT Toilets, it means the app and the product are not connected. Connect the product to the app and ensure that the pairing is successful.
M
Mario HernandezSep 16, 2025
How to stop odor extraction after leaving DURAVIT Toilets?
- T
  Timothy HarrisSep 16, 2025
  To stop the odor extraction of your DURAVIT Toilets after you leave the toilet, deactivate the odor extraction follow-up time.
P
Paul DelacruzSep 14, 2025
Why does my DURAVIT SensoWash Starck f Plus switch to energy saving mode automatically?
- T
  Troy ThompsonSep 14, 2025
  Your DURAVIT Toilets automatically switches to auto energy saving mode if all functions are inactive for 48 hours. To reactivate your previous settings, activate any function.
Y
yeseniawilliamsSep 12, 2025
Why is the LED flashing red when using my DURAVIT SensoWash Starck f Plus Toilets remote control?
- M
  Miguel RodriguezSep 12, 2025
  If the LED flashes red when the remote control is in use with your DURAVIT Toilets, it means the remote control is not connected to the product. Contact help@duravit.com for assistance.
T
Tina GarzaSep 12, 2025
Why is the white LED blinking on my DURAVIT SensoWash Starck f Plus remote control?
- H
  haysdavidSep 12, 2025
  If the white LED blinks for 3 seconds when the remote control is in use with your DURAVIT Toilets, it means the batteries are low. You should change the batteries.
L
Linda CrawfordSep 9, 2025
How to fix a DURAVIT SensoWash Starck f Plus Toilets spray wand that is not working?
- L
  Latoya SmithSep 9, 2025
  If water does not emerge from the spray wand of your DURAVIT Toilets, it is likely because the spray nozzle is clogged. Clean the spray nozzle to resolve this issue.
D
David RobinsonSep 7, 2025
Why does the LED on my DURAVIT SensoWash Starck f Plus flash red, green, or orange?
- A
  ablackSep 7, 2025
  If the LED on your DURAVIT Toilets flashes red, green, or orange, or you hear an indication tone, it indicates a malfunction. Deactivate the seat unit, close the stop valve, and then contact Duravit at help@duravit.com.
C
carolynbrownSep 5, 2025
What to do if my DURAVIT SensoWash Starck f Plus Toilets are leaking?
- S
  Sarah BoydSep 5, 2025
  If water is leaking from your DURAVIT toilet, it is likely due to a malfunction. Immediately close the main valve for the water supply and disconnect the power supply. Then, contact help@duravit.com for assistance.
M
Michelle JosephAug 20, 2025
What to do if water spray intensity is too weak on DURAVIT SensoWash Starck f Plus Toilets?
- B
  Becky SimpsonAug 21, 2025
  If the water spray intensity is too weak on your DURAVIT Toilets, it might be set to low. Try adjusting the water spray intensity to medium or high. If this doesn't solve the problem, it may be due to a water supply defect, in which case you should contact help@duravit.com.