How to fix DURAVIT SensoWash Starck f Lite when water does not emerge from the spray wand?
If water does not emerge from the spray wand of your DURAVIT Toilets, it is likely that the spray nozzle is clogged. Clean the spray nozzle to fix this.
What to do if DURAVIT Toilets unit does not work?
If your DURAVIT Toilets unit isn't working, check if the seat unit is in standby mode, indicated by a red LED. If it is, switch on the seat unit.
What to do if DURAVIT Toilets are leaking water?
If you notice water leakage from your DURAVIT Toilets, it indicates a malfunction. Close the main valve for the water supply and disconnect the power supply.
What to do if icons on DURAVIT Toilets remote control flash?
If icons on your DURAVIT Toilets remote control flash during operation, it means the batteries are low. Replace the batteries to resolve this issue.
Why DURAVIT SensoWash Starck f Lite remote control does not work?
If the remote control for your DURAVIT Toilets isn't working, the first thing to check is whether batteries are inserted. If not, insert batteries.
Why is the LED flashing on my DURAVIT SensoWash Starck f Lite?
If the LED on your DURAVIT Toilets flashes red, green, or orange, or if an indication tone is audible, this indicates a malfunction. Deactivate the seat unit and close the stop valve.
Why DURAVIT Toilets app does not work?
If your DURAVIT Toilets app isn't working, it's likely that the app and the product aren't connected. Connect the product to the app, ensuring that pairing is successful.
Why is DURAVIT SensoWash Starck f Lite seat temperature too cold?
If the seat temperature on your DURAVIT Toilets is too cold, and the product is in energy saving mode (orange LED), this is normal. To heat the seat, switch off energy saving mode.
Why does water spray stop on DURAVIT SensoWash Starck f Lite Toilets?
If the water spray from the spray wand of your DURAVIT Toilets suddenly stops, this is normal because the function stops automatically after 2 minutes.
Guidelines for the intended and proper use of the SensoWash® unit.
Critical safety warnings and precautions to prevent injury or damage.
Details how to operate the SensoWash® via remote or app.
Instructions on how to power the SensoWash® unit on and off.
How to turn the rear cleansing function on or off.
How to turn the feminine cleansing function on or off.
How to activate or deactivate the warm air drying feature.
Troubleshooting common issues indicated by LED lights on the unit.
Solutions for problems like the unit not working or being in standby.
Troubleshooting steps for water leakage problems.
Diagnosing and resolving issues related to the remote control.
To Next Page
General