DURAVIT ME BY STARCK - User Manual

Questions and Answers

A
Aaron MedinaJul 28, 2025
Why is there no flushing or reduced flushing in my DURAVIT Toilet?
- S
  Steven RobinsonJul 28, 2025
  If your DURAVIT Toilet isn't flushing properly, several factors could be responsible. The corner valve might be closed, so ensure it is open. A hose could be pinched or kinked, so check the hoses. There might be no connection between the control unit and the electronic valve, so check the connection cable. The electronic valve could be faulty, so consider replacing it. Also, the dirt filter might not be clean, so clean the dirt filter. Finally, the battery could be empty, so replace the battery.
P
Paul ThompsonAug 2, 2025
What to do if my DURAVIT Toilet has no flushing or reduced flushing?
- L
  Laura RamirezAug 2, 2025
  If your DURAVIT Toilet experiences flushing issues, start by opening the corner valve and checking the hoses for any pinches or kinks. Inspect the connection cable between the control unit and the electronic valve. If the issue persists, clean the dirt filter and replace the battery. If none of these steps work, replace the electronic valve. For additional assistance, begin system diagnosis.
L
Leah SmithAug 9, 2025
What to do if it is not possible to start up DURAVIT Toilet?
- B
  Bobby CunninghamAug 9, 2025
  If your DURAVIT Toilet won't start, it might be because the start-up has already occurred, in which case you should perform a reset. Another possibility is an empty battery, so replace it. Also, check if the power supply cable has been connected incorrectly and connect the power supply unit correctly.
Z
zcostaAug 14, 2025
Why DURAVIT ME BY STARCK Toilets make three long signal tones without flushing?
- J
  James GreeneAug 14, 2025
  If your DURAVIT Toilet is emitting three long signal tones without flushing, the battery is likely low or empty. Replacing the battery should resolve this issue.
J
jamie64Aug 21, 2025
Why is it not possible to start up my DURAVIT Toilet?
- A
  anthonyschmidtAug 21, 2025
  If you're having trouble starting your DURAVIT Toilet, consider these potential causes: the start-up may have already occurred, requiring you to perform a reset. Alternatively, the battery might be empty, so replace it. Finally, the power supply cable could be incorrectly connected; ensure it is properly connected.

Summary

Safety

Safety Instructions

Details potential hazards like electric shock and improper repair risks.

Start-up

Activating the Control Unit

Resetting the System (S4)

Operation

Selecting the Flushing Programme

Guide to select between 0.5 litres, Standard, and Vario flushing programmes.

Setting the Flush Duration (S3)

Cleaning and Care

Activating Five-Minute Flush Stop (S1)

Cleaning the Dirt Filter

Troubleshooting Support

No Flushing or Reduced Flushing

Addresses issues with flushing not occurring or being reduced.

Not Possible to Start Up

Guides on resolving issues preventing the urinal from starting.

No Mains Connection or Faulty Components

Solutions for no mains connection, faulty power/control units.

Three Long Signal Tones Without Flushing

Explains causes and solutions for signal tones without flushing.

Maintenance

Monitoring the Battery Status

Conduct a System Diagnosis

Steps to perform a system diagnosis to identify faults.

DURAVIT ME BY STARCK Specifications

General

Design	Philippe Starck
Material	Ceramic
Color	White
Flush Type	Dual Flush
Bowl Shape	Elongated
Brand	Duravit
Series	ME by Starck
Rim Type	Rimless
Water Consumption	4.5 l