EasyManua.ls Logo

DURKOPP ADLER 219 User Manual

DURKOPP ADLER 219
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the DURKOPP ADLER 219 and is the answer not in the manual?

DURKOPP ADLER 219 Specifications

General IconGeneral
BrandDURKOPP ADLER
Model219
CategorySewing Machine
LanguageEnglish

Summary

1. Raising the Cloth Presser Foot

3. Needles and Threads

6. Threading Procedures

8. Regulating Thread Tensions

8.1. Needle Thread Tension

How to regulate needle thread tension.

8.2. Hook Thread Tension

How to regulate hook thread tension.

9. Regulating Presser Foot Pressure

10. Adjusting Feed Length and Reverse Feed

10.1. DÜRKOPP 211/212 Feed Adjustment

Adjusting feed length for specific DÜRKOPP 211/212 models.

10.2. DÜRKOPP 211 Feed Adjustment

Adjusting feed length for specific DÜRKOPP 211 models.

10.3. DÜRKOPP 211 Feed Adjustment

12. Lubrication Procedures

13. Adjusting Presser Foot and Puller Stroke

13.1. Limiting Presser Bar Lift Movement

Adjusting the presser bar lift movement limit.

13.2. Adjusting Presser Bar Height (Lifting Stroke)

Adjusting presser bar height for lifting stroke.

13.3. Adjusting Presser Bar Height (Puller Stroke)

Adjusting presser bar height for puller stroke.

14. Adjusting Feed Dog Motion

14.2. Setting Feed Zero Point and Equal Feed Length

Setting feed zero point and equal feed length.

14.3. Adjusting Final Feeding Motion

15. Adjusting Drop and Needle Feed (DÜRKOPP 212)

16. Adjusting the Feed Dog

17. Adjusting Hook and Needle Bar Height

17.3. Adjusting Hook-Needle Lateral Distance

Adjusting hook-needle lateral distance and hook case alignment.

29. Installing the Machine

31. Machine Maintenance

33. Adjusting Upper Knife Lifting Movement

34. Fork Lever Zero Position

35. Positioning the Guiding Block

41. Switching Cloth Guide Position

43. Regulating the Cloth Guide

48. Regulating Feeding Foot and Presser Foot Pressure

50. Adjusting Feed Length and Reverse Feed

51. Adjusting Lower and Upper Feed

52. Lower and Upper Feed Adjusting Possibilities

56. Machine Setup

58. Operation Guide

63. Adjusting the Transversal Cutter

65. Motor Types and Operation

67. Adjusting the Thread Cutter

72. Adjusting Hook-Shaped and Counter Knives

Related product manuals