Duro TITAN DSBW300 - User Manual

Save these instructions & keep track of your product’s serial#
Submersible Wastewater Pump
Models: DSBF300 DSBW300
Operating & Installation Instructions
This manual contains important
safety and operating instructions.
Read all instructions and follow
them when using this product.
Failure to consider this information
and follow these instructions,
including those concerning
maintenance, may result in property
damage, injury and or death.
NOTE: THIS PRODUCT MAY FAIL
WHERE NOT MAINTAINED, IN
CATASTROPHIC EVENTS OR IN
POWER FAILURES. MONITOR THIS
PRODUCT CLOSELY.
Canature WaterGroup Canada Inc. (“Canature”)
did not design or manufacture this product. Canature
has no knowledge of and makes no representations or
warranties respecting the product’s design,
manufacturing, testing, packaging, or inspecting.
Canature has disclosed all known risks associated with
the product within this manual but cannot disclose
risks that are beyond its knowledge.
NOTICE: THIS MANUAL CONTAINS A LIMITED
WARRANTY. BY INSTALLING AND OR USING THIS
PRODUCT, YOU WAIVE CERTAIN LEGAL RIGHTS
INCLUDING THE RIGHT TO SUE OR CLAIM
COMPENSATION IN THE EVENT OF PROPERTY
DAMAGE, INJURY, AND OR DEATH.
PROFESSIONAL SERIES

Summary

Reading This Manual

Introduction

Pump Specifications

Safety Instructions

Installation Instructions

Piping for Effluent Applications - 19 mm [3;4″] of less solids

Specifies piping materials and minimum size requirements for effluent applications with limited solids.

Piping for Sewage Applications 51 mm [2] or less solids (DSBW300)

Details piping requirements for sewage applications, accommodating solids up to 51 mm.

Check Valves & Air Locking

Instructions on installing check valves and preventing air locking issues for reliable pump performance.

Basin Cover & Vent

Explains the importance and requirements of basin covers and vents for sewage applications.

Electrical Installation

Automatic Thermal Overload Protection

Information on the motor's built-in automatic overload protector that prevents overheating.

Liquid Level Control Operation

How to adjust the float switch for proper pump activation and deactivation based on liquid levels.

Optional Alarm

Discusses the benefits of installing an optional alarm to monitor pump status and potential issues.

Maintenance

Cleaning the Pump

Troubleshooting Checklist

Pump does NOT run or hums

Troubleshooting steps for when the pump fails to start or operate.

Pump will NOT stop running

Solutions for issues where the pump operates continuously without stopping.

Motor runs, but does not pump sufficient (or any) water

Diagnosing why the pump motor runs but no water is being discharged.

Pump starts and stops frequently

Addressing the problem of the pump cycling on and off too often.

Guarantee

Additional Limitations

Lists specific circumstances and damages that are excluded from the product warranty coverage.

Notice to Consumer

Informs users about their legal rights and the limitations accepted by installing or using the product.

Duro TITAN DSBW300 Specifications

General

Power	300 W
Cable Length	10 m
Max Submersion Depth	7 m
Frequency	50 Hz
Material	Plastic
Outlet Size	1 inch
Voltage	230 V