DV Mark DV MICRO 50 II - Technical Specs; Block Diagram; Power Requirement

7
Channels: Two (clean / lead)
Controls: Level (clean ch)
Drive / Level (lead ch)
EQ Controls: Bass - Mid - High (clean ch)
Bass - High (lead ch)
Speaker Outputs: Two ¼” Jacks mono out 8 ohm
Power Output: 60W @ 4ohm / 50W @ 8ohm
Other Features: Footswitch input for channels switch
AUX IN
Headphones OUT
XLR Line OUT with GND Lift
Dual Voltage selector 120V/240V
(not available on the 100V version manufactured for Japan
)
Dimensions: DV MICRO 50 II 200 x 64 x 221 mm / 7.87” x 2.51” x 8.7”
DV MICRO 50 M 200 x 64 x 221 mm / 7.87” x 2.51” x 8.7”
DV MICRO 50 CMT 200 x 64 x 221 mm / 7.87” x 2.51” x 8.7”
Weight: DV MICRO 50 1,9 kg / 4.19 lbs
DV MICRO 50 M 1,9 kg / 4.19 lbs
DV MICRO 50 CMT 1,9 kg / 4.19 lbs
POWER REQUIREMENT: 120V; 230V; 240V - 50/60Hz
100V - 50/60Hz (version manufactured for Japan)
FUSES: T 2A 250V for 100V/120V setting;
T 1A 250V for 230V/240V setting
TECHNICAL SPECS - DV MICRO 50 II - DV MICRO 50 M - DV MICRO 50 CMT
Input
Drive
Power
Out
TONES
Power
Level
Level TONES
REVERB
AUX
Send
Return
Phones
Headphones
Out
BLOCK DIAGRAM