DV Power RMO40TD - Accessories; Manufacturer Contact Information

49
RMO40TD Error Messages
9.8 USB Interface
RMO40TD is equipped with an USB serial interface to connect to an external computer.
10 Accessories
Recommended
Article No
Current cables 2 x 10 m, 10 mm
2
with battery clips
C2-10-10LMB1
Sense cables 2 x 2 x 10 m with alligator clips
S2-10-02BPA2
Current connection cable 1 x 5 m 10 mm
2
CX-05-102XB1
DV-Win PC software including USB cable
RMO40TD-N-00
Current clamp 20/200A + cable set 5 m
CACL-0200-00
Mains power cable
MPCXXA-XX-00
Ground (PE) cable
RMO40TD-N-00
Cable bag
CABLE-BAG-00
Optional
Article No
Current cab
C2-15-10LMB1
Sense cables 2 x 2 x 15 m with alligator clips
S2-15-02BPA2
Built-in Tap Changer Control Unit + 5 m control cable
TAPCCU-05-00
Cable plastic case
CABLE-CAS-00
Test shunt 150 A / 150 mV
SHUNT-150-MK
Manufacturer Contact Information
IBEKO Power AB

Fax: + 46 8 731 77 99
E-Mail: support@dv-power.com
Website: http://www.dv-power.com