SDI-W
Feb ‘19
- 12
Compressor Unit Parts (cont’d)
5 to 10 HP Horizontal Compressor Units.
Description: IS5-10080H IS7-100120 IS10-100120
Pump Assembly DEV-100 DEV-100 DEV-100
Intake Filter Assembly See ‘Note A’ See ‘Note A’ See ‘Note A’
Intake Filter Element See ‘Note A’ See ‘Note A’ See ‘Note A’
Beltguard Assembly EG-9491 EG-9492 EG-9492
Motor Pulley – 1 Phase PU-9236 PU-9091 PU-9196
Belt BT-9041 BT-9046 BT-9036
Tank TA-9461-1 TA-9463-1 TA-9463-1
Pressure Switch SSS-9003U115150 SSS-9003U115150 SSS-9003U115150
Pressure Gauge GA-250 GA-250 GA-250
Tank Safety Valve TIA-5200 TIA-5200 TIA-5200
Tank Drain Ball Valve VA-9411 VA-9411 VA-9411
Tank Ball Valve VA-9705 VA-9705 VA-9705
Check Valve CCV-9403 CCV-9408 CCV-9408
Note A: The Filter Assembly and internal Filter Element were changed in 2012. The older style Element
is still available, and the Filter Elements are not interchangeable. Please measure the Element
to determine which Filter Assembly, Filter Element, and Maintenance Kit is correct for your
Pump.
Older Assembly Older Filter Element Older Filter Element Dimensions Older Maintenance Kit
PB-21176001 PB-21177013 4-1/8” OD x 2-3/4” ID x 2”H MK-100
New Assembly New Filter Element New Filter Element Dimensions New Maintenance Kit
357-9401 357-9701 4-3/8” OD x 3” ID x 2-1/4” H MK-100-1
Maintenance Kits:
The appropriate Maintenance Kit for the 5 to 10 HP Units noted above having the ‘DEV-100’ Pumps is as follows:
Pump Model: Maintenance Kit:
Includes:
DEV-100 DEV-100 (2) PB-21177013 (1) PR-31-4
DEV-100 DEV-100-1 (2) 357-9701 (1) PR-31-4
Note: Choose the appropriate Maintenance Kit based on the Filter Element dimensions as noted
above.
To Next Page
Loading...
Need help?
General
