Dwyer Instruments Magnehelic 2000 Series User Manual

BULLETIN NO.A-27
Magnehelic
®
Differential Pressure Gage
OPERATING INSTRUCTIONS
SPECIFICATIONS
Dimensions: 4-3/4 dia. x 2-3/16 deep.
Weight: 1 lb. 2 oz.
Finished: Baked dark gray enamel.
Connections: 1/8 NPT high and low pressure
taps, duplicated, one pair side and one
pair back.
Accuracy: Plus or minus 2% of full scale, at
70°F. (Model 2000-0, 3%; 2000-00, 4%).
Pressure Rating: 15 PSI (0,35 bar)
Ambient Temperature Range: 20° to 140°F
(-7 to 60°C).
Standard gage accessories include two 1/8
NPT plugs for duplicate pressure taps,
two 1/8 NPT pipe thread to rubber tubing
adapters, and three flush mounting
adapters with screws.
Caution: For use with air or compatible
gases only.
For repeated over-ranging or high cycle rates,
contact factory.
Not for use with Hydrogen gas. Dangerous
reactions will occur.
DWYER INSTRUMENTS, INC.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361 U.S.A.
Phone: 219/879-8000 www.dwyer-inst.com
Fax: 219/872-9057 e-mail: info@dwyer-inst.com
Lit-by-Fax: 888/891-4963
11/16
[17.46]
1/8 NPT LOW
PRESSURE
7/16
[11.11]
1-11/16
[42.86]
1/2
[12.70]
1/8 NPT LOW
PRESSURE
1/8 NPT HIGH
PRESSURE
1/2
[12.70]
1/8 NPT HIGH
PRESSURE
Ø4-1/8 [104.78] BOLT
CIRCLE FOR PANEL MOUNTING
120° APART
1-1/4
[31.75]
Ø4-3/4
[120.65]
1-3/4
[44.45]

Dwyer Instruments Magnehelic 2000 Series Specifications

General

Brand	Dwyer Instruments
Model	Magnehelic 2000 Series
Category	Measuring Instruments
Language	English