Need help?Do you have a question about the dye M3s and is the answer not in the manual?
General| Brand | dye |
|---|---|
| Model | M3s |
| Category | Video Gaming Accessories |
| Language | English |
How to power on the marker and interpret LED indicator lights.
Specifies required gas type and operating pressure for the marker.
Procedure for connecting and filling the air system to the marker.
Instructions for charging the marker's rechargeable battery via USB.
Steps to initiate the marker's power-up sequence.
Steps to safely shut down the marker.
Explains the meaning of various LED indicator light colors.
How to select and manage different user-defined play profiles.
Navigating menus to adjust performance and data settings.
Introduction to options for reviewing data, display controls, and system parameters.
Adjusting the time delay before a subsequent trigger pull is permitted.
Setting the maximum rate of fire for the paintball marker.
Choosing between various firing modes like Semi-Auto, Ramp, and Burst.
Personalizing profile names for easier identification.
Choosing from different display screens for gameplay information.
Selecting or downloading custom boot screens.
Monitoring paint consumption using countdown or sum tracking.
Tracks total shots fired for system monitoring and service schedules.
Selecting the preferred method for powering down the marker.
Feature to enable rapid marker readiness upon power activation.
Setting the inactivity period before the marker automatically powers down.
Adjusting the display brightness for better screen visibility.
Configuring the screen to go to sleep after a set period of inactivity.
Viewing the marker's internal pressure sensor readings.
Indicates when major components require maintenance.
Resets the current profile to its original factory settings.
Drill to improve speed and accuracy from a stationary starting position.
Drill to enhance speed, accuracy, and muscle memory during snap shooting.
Drill to practice trigger speed without using paint or air.
Step-by-step guide for updating the marker's firmware.
Instructions on file conversion for custom boot screens.
Detailed steps for charging the marker's battery.
Method for charging the marker using a wireless base.
Alert indicators and consequences of a low battery status.
How to fine-tune trigger travel and reach angle.
External adjustment for the Ultralite trigger's angle.
Instructions for installing the tool-less sticky grips.
Understanding the basic operation of the F-21 engine.
Recommendation for lubricant and frequency for engine maintenance.
Instructions on how to remove the bolt from the marker.
How to adjust the marker's velocity using the regulator.
Details on adjusting velocity by turning the regulator.
Steps for disassembling the Hyper6s Pro regulator cartridge.
Procedure for replacing the regulator seat component.
Steps for assembling and installing the Hyper6s regulator cartridge.
How to adjust the length and position of the ShiftPort ASA.
Steps for removing the pin-housing assembly from the ShiftPort.
Steps for installing the pin housing assembly into the ShiftPort.
How to adjust the feedneck for loader compatibility.
Instructions for safely removing the frame from the marker body.
Feature that cleans the eye pipe and lens for consistent performance.
How to change or inspect the ball detents.
Common causes and solutions for air leaks from various marker parts.
Specific troubleshooting for leaks at the air system connection.
Troubleshooting leaks between the marker body and frame.
Steps to diagnose and resolve issues with the marker failing to power on.
Troubleshooting slow shooting when the eye system indicates a problem.
Diagnosing issues with the solenoid or trigger activation.
Troubleshooting balls dropping or not exiting the barrel.
A detailed list of all components of the M3s marker.
Details the manufacturer's warranty terms and limitations.
Contact information for customer and technical support.
Contact details for DYE Precision, Germany, and Asia offices.
To Next Page