Introduction
Introduction to the User Guide
This guide describes how to assemble, use, and maintain the Dymax EC-series flood lamps for UVCS-series
conveyors safely and efficiently.
Intended Audience
Dymax prepared this user guide for experienced process engineers, technicians, and manufacturing personnel.
If you are new to UV light sources and do not understand the instructions, contact Dymax Application
Engineering to answer your questions before using the equipment.
Where to Get Help
Dymax Customer Support and Application Engineering teams are available in the United States, Monday
through Friday, from 8:00 a.m. to 5:30 p.m. Eastern Standard Time. You can also email Dymax at
info@dymax.com. Contact information for additional Dymax locations can be found on the back cover of this
user guide.
Additional resources are available to ensure a trouble-free experience with our products:
Detailed product information on www.dymax.com
Dymax adhesive Product Data Sheets (PDS) on our website
Material Safety Data Sheets (SDS) provided with shipments of Dymax adhesives
Safety
WARNING! If you use a Dymax UV flood lamp without first reading and understanding the
information in this user guide, injury can result from exposure to UV light. To reduce the risk of
injury, read and ensure you understand the information in this user guide before assembling and
operating an EC-series flood lamp.
General Safety Considerations
All users of Dymax light-curing flood lamps should read and understand this user guide before assembling and
using the system.
To learn about the safe handling and use of light-curable formulations, obtain and read the MSDS for each
product. Dymax includes an MSDS with each adhesive sold. In addition, fluid product MSDS can be requested
through the Dymax website.
To Next Page
Loading...