Product Overview
Description of the Dymax UVCS Conveyor System
The Dymax UVCS Light-Curing Conveyor System is designed to provide reliable and consistent processing of
UV/Visible light-curable adhesives and coatings. Standard features include a Direct-Drive Motor, adjustable
Lamp height, integrated and adjustable Cooling System, and a UV-Resistant Belt.
The UVCS is designed for bench- or table-top operations. The self-contained Cooling System and integral UV
light allows the Conveyor to be placed virtually anywhere space permits.
Dymax UV light-curing sources are capable of curing a wide variety of light-curable adhesives, coatings, and
inks. They have extensive use in a variety of applications such as bonding, potting, sealing, and encapsulating.
These light sources offer exceptional versatility and expandability to accommodate most process demands.
A large number of accessories are available for the base Conveyor. These items address safety, as well as
functional flexibility, which is depicted and discussed in this manual.
Figure 2. UVCS Conveyor System with Two Fusion Lamps (UVCS 39 not shown)
Unpacking and Setup
Unpacking and Inspecting Your Shipment
When your conveyor arrives, inspect any boxes for damage and notify the shipper immediately of box
damage.
Open each box and check for equipment damage. If parts are damaged, notify the shipper and submit a claim
for the damaged parts. Contact Dymax so that new parts can be shipped to you immediately.
To Next Page
Loading...