10
Adding Clip Art
The label maker includes the clip art shown below.
To insert clip art
1 Press , select , and then press .
2 Select Clip Art, and then press .
3 Press the navigation keys to select an image.
4 Press to add the image to your label.
Adding Accented Characters
The label maker supports the extended Latin character
set. You can add accented characters in two ways:
Press and then the alpha character.
Press and hold the alpha character.
After pressing the alpha character, all of the available
variations of that letter are displayed.
For example, if you press and hold the letter a, you will
see a à â æ and so on through all the variations available.
To add accented characters
1 Press and hold an alpha character.
The accent variations for that character are displayed.
2 Press or to select the character you want, and
then press .
Inserting the Date and Time
You can insert the current date and time on your label.
The date and time format depends on the format you
have selected in the label maker settings.
To set the date and time format
1 Press , select , and then press .
2 Select , and then press .
3 Select Notation, and then press .
4 Select the date or date and time format to use, and
then press .
To set the date
1 Press , select , and then press .
2 Select , and then press .
3 Select Set date, and then press .
4 Use the navigation keys to select the current day,
month, and year.
5 Press , and then press twice to return to the
edit area.
To set the time
1 Press , select , and then press .
2 Select , and then press .
3 Select Set time, and then press .
4 Use the navigation keys to select the current hour
and minutes.
5 Press , and then press twice to return to the
edit area.
To insert the date and time
1 Press , select , and then press .
2 Select Date and Time, and then press .
The date and time are inserted on the label.
↔
☺
!
"
#
$
%
♠ ♣ ♥ ♦
To Next Page
Loading...
Need help?
General
