12
The selected label is opened in the edit area.
Inserting Saved Text
You can insert the text of a saved label into the current
label. Only the saved text is inserted, not the formatting.
To insert saved text
1 Position the cursor at the location in the label where
you want to insert the text.
2 Press , select , and then press .
3 Press or to select Saved text, and then press
.
The first memory location is displayed.
4 Press or to select the text to insert, and then
press .
The text is inserted in the current label.
Caring for Your Label Maker
Your label maker is designed to give you long and
trouble-free service, while requiring very little
maintenance.
Clean your label maker from time to time to keep it
working properly. Clean the cutter blade each time you
replace the label cassette.
To clean the cutter blade
1 Remove the label cassette.
2 Press and hold the cutter button to expose the cutter
blade. See Figure 7.
3 Use a cotton swab and alcohol to clean both sides of
the blade.
The cutter blade is extremely sharp. Use caution
when cleaning.
To clean the print head
1 Remove the label cassette.
2 Remove the cleaning tool from inside the label
compartment cover. See Figure 8.
3 Gently wipe the padded side of the tool across the
print head. See Figure 8.
Figure 7
Cutter blade
Press and
hold
Figure 8
Cleaning tool
Print head
To Next Page
Loading...
Need help?
General
