Dymo LetraTag LT-100T User Manual

4
Inserting the Batteries
The labelmaker uses four high-capacity AA alkaline batteries.
To insert the batteries
1. Remove the battery compartment
cover. See Figure 2.
2. Insert the batteries following the
polarity markings (+ and –).
3. Replace the cover.
Ç Remove the batteries if the
labelmaker will not be used for a long
period of time.
Figure 2
Connecting the Optional Power Adapter
An optional 9 Volt,1.5 A power adapter can also be used to power
the labelmaker. Connecting the AC adapter to the labelmaker
disconnects the batteries as a power source.
To connect the power adapter
1. Plug the power adapter into the power connector on the top of
the labelmaker.
2. Plug the other end of the power adapter into a power outlet.
LT Momentum AUS.indd 4 19-03-2007 09:12:48

Dymo LetraTag LT-100T Specifications

General

Display	LCD
Product color	Gray
Keyboard layout	QWERTY
Battery type	AA
Auto power off	Yes
Number of batteries supported	4
Number of styles	7
Number of box types	8
Number of characters	195
Number of printing lines (max)	2
Label memory	9 label(s)
Country of origin	China
Package depth	643 mm
Package width	260 mm
Package height	280 mm
Package weight	3800 g
Batteries included	No
Print technology	Direct thermal
Maximum resolution	180 x 180 DPI
Maximum label width	12 mm
Pallet width	800 mm
Pallet height	990 mm
Pallet length	1200 mm
Pallet weight	83100 g
Number of cartons per pallet	90 pc(s)

Weight and Dimensions

Depth	80 mm
Width	220 mm
Height	229 mm
Weight	400 g