To Next Page
P
Patrick WeberAug 7, 2025
What to do if Dymo S250 Scales display 00000?
- WwoconnellAug 8, 2025
If your Dymo Scales display '00000', it means the item on the scale exceeds its maximum capacity. Remove the item immediately to prevent damage.
What to do if Dymo S250 Scales display 00000?
If your Dymo Scales display '00000', it means the item on the scale exceeds its maximum capacity. Remove the item immediately to prevent damage.
What to do if Dymo S250 Scales display reads 0.0 with an item on the platform?
If your Dymo Scales display reads 0.0 with an item on the platform, it may be because: 1. The Tare/Zero button was pressed while an item was on the scale. 2. Power to the scale was disconnected or turned off and then on again with an item on the scale. In both cases, remove the item from the platform.
Why do Dymo S250 Scales display LO?
If your Dymo Scales display 'LO', it indicates that the batteries need to be replaced. Please replace the batteries.
How to fix Dymo S250 Scales with no display?
If your Dymo Scales have no display, ensure the scale is properly plugged in. If it is, try replacing the batteries.
What to do if Dymo Scales display a negative number?
If your Dymo Scales display a negative number, press the button to reset the scale to zero.
General| Capacity (lb) | 250 lb |
|---|---|
| Resolution (lb) | 0.1 lb |
| Resolution (kg) | 0.05 kg |
| Auto Shut-off | Yes |
| Graduation (lb) | 0.1 lb |
| Display | LCD |
| Platform Size (inches) | 12 x 12 inches |
Instructions for powering the scale via adapter, USB, or batteries.
How to zero out the weight of a container before weighing contents.
Freezing the displayed weight after removing the item from the scale.
Switching between English (pounds) and metric (kilograms) units.
Instructions for mounting the detachable display magnetically or with screws.
Guidelines for proper operation, storage, and handling for scale longevity.
Details on capacity, increments, accuracy, operating temperature, and interface.
Solutions for common error messages and display issues encountered with the scale.
Details of the one-year limited warranty, coverage, and claim procedures.
FCC compliance statement for the digital device.
Steps to prevent damage to electronic devices from static electricity.
Information on resource use, hazardous substances, and recycling.
Template for drilling holes to mount the scale display on a non-magnetic surface.
