Dyna-Glo DGF510SSP - Page 13

13
13
ASSEMBLY INSTRUCTIONS
13. Insert 2 M6x16 screws (AA) in right side of Grill
body (C) as shown, leaving 5mm of threads
exposed. Align key hole in Right side table
assembly (L) with the 2 screws just inserted
in the Grill body (C), and insert 3 M6x16
screws (AA) in the remaining holes in the Grill
body (C). Adjust Right side table assembly (L)
correctly, then tighten all screws.
AA
C
AA
L
Hardware Used
AA
M6x16 Screw
x 5
5mm