What to do if Dyna-Glo DGH563CRN Grill burner won't light with a match?
- JJohn BrownAug 7, 2025
If the burner on your Dyna-Glo Grill won't light with a match, first, use the match holder found in the cabinet door to ensure the match reaches the burners. Then, verify that the natural gas supply shut-off valve is open. Check the connection between the gas hose plug fitting and sleeve coupling, disconnecting and reconnecting if necessary. Lastly, the burner inlet may be blocked, so clean the burner inlet (venturi) and burner as described by the Care and Maintenance section in the manual.