Dyna-Glo DGN576SNC - Operating Instructions; Divider Panel Removal and Reinstallation

14
OPERATING INSTRUCTIONS
2. Remove warming rack supports (U), from
the rebox, by pressing both bars in
towards the center of the grill. Swing the
warming rack (U) up, to make clearance
for the divider panel (Y).
3.Remove divider panel (Y) from rebox
assembly (B). Return grates and warming
rack to their original positions.
NOTE: When placing the divider panel into the
rebox assembly (B), please make sure the
bottom of the divider ts between the support
brackets located on the front and back sides of
the rebox.
T
U
B
Y
U
B
1.Remove four grates (T) in lid and rebox
assembly (B).
1
2
3
Removing divider panel from grill