To Next PageTo Next Page
Need help?Do you have a question about the Dyna-Glo Workhorse EG7500WH and is the answer not in the manual?
General| Model | EG7500WH |
|---|---|
| Type | Portable |
| Fuel Type | Electric |
| Power Source | Electric |
| Voltage | 240V |
| Wattage | 7500W |
| BTU | 25590 BTU |
| Coverage Area | 750 sq. ft. |
| Thermostat | Yes |
| Mounting | Portable |
| Safety Features | Overheat Protection, Tip-Over Switch |
| Heater Type | Forced Air Heater |
Critical safety guidelines for operating the heater, covering burns, clearances, and hazardous environments.
Details the heater's electrical rating, amperage, and BTU output.
Crucial advice on installation, wiring, grounding, and adherence to electrical codes.
Guidelines for proper placement and minimum clearance requirements for safe operation.
Lists included parts and preparation steps before installation.
Step-by-step instructions for securely installing the mounting bracket.
Steps for attaching the heater and adjusting its position and airflow direction.
Detailed instructions for electrical hookup, including external thermostat integration.
Explanation of the heating element's operation and the essential cooldown cycle.
How to use the control panel and remote for temperature, timer, and mode settings.
Procedures for cleaning and caring for the heater to ensure longevity and performance.
Identification of replaceable components with their part numbers for ordering.
Solutions for issues like error codes, no heat, or operational malfunctions.
Details on the limited warranty, coverage, exclusions, and registration process.
