To Next PageTo Next Page
Need help?Do you have a question about the Dyna-Glo EG7500DG and is the answer not in the manual?
General| Model | EG7500DG |
|---|---|
| Heater Type | Electric |
| Fuel Type | Electric |
| Power Source | Electric |
| Thermostat | Yes |
| Built-in Thermostat | Yes |
| Overheat Protection | Yes |
| Safety Shut-Off | Yes |
| Safety Features | Overheat Protection, Safety Shut-Off |
| Mounting | Portable |
| Fan | Yes |
| Wattage | 7500 W |
| Voltage | 240 V |
| Amperage | 31.25 Amps |
Details the design and features of the electric utility heater, including heat output.
Lists key specifications such as BTU output, power consumption, and voltage requirements.
Heater requires hardwire installation by a certified electrician per local and national electrical codes.
Maintain specified clearances from walls, floor, ceiling, and objects for safe operation and airflow.
Instructions for securely mounting the heater's bracket to a ceiling joist using lag bolts.
Steps to attach and securely hang the heater unit onto the mounting bracket.
How to adjust the heater's angle for optimal air flow using bracket screws and keyholes.
Instructions for adjusting the louvers to the desired position; they cannot be fully closed.
Details on heater ratings, wire sizes, fuse requirements, and basic wiring diagrams.
Guide to connecting an external temperature control (thermostat) to the heater.
Proper sequence for using thermostat controls and critical safety warnings for power connection.
How to adjust the thermostat knob to control heat output and comfort levels.
Using the switch to select between 6250W and 7500W heating outputs.
Explanation of the automatic safety shut-off mechanism and caution indicator.
Details of the one-year limited warranty, coverage, exclusions, and owner's duties.
Instructions on how to contact customer service and process a warranty claim.
