dynabook SATELLITE PRO C50-H - Table 1-1 SSD Specifications

14
SATELLITE PRO C50-H, SATELLITE C50-H Maintenance Manual
Table 1-1 SSD Specifications
1.4 Power Supply
The power supply unit provides many different voltages for the system board and
performs the following functions:
1. Power input monitor
 Checks whether the DC power supply (AC adapter) is connected to the
computer.
 Checks whether the battery pack is connected to the computer.
 Monitors the DC power supply input (AC Adapter output).
2. Power supply's internal control
 Turns on and off the battery pack charging power supply.
 Issues a charging current instruction to the PWM control IC of the battery
pack charging power supply.
 Controls the supply of power to the system block (load/logic circuit side).
 Controls forced shutdown if the power supply malfunctions.
3. Logic circuit control
 Instructs the gate array to enable/disable tuning the power on.
 Controls power-on/off operation.
4. Status display
 Turns on the Power.
 Battery indicator (in Blue or Amber or Amber Blink).
Item
Read
Write
Data transfer
rate
LBA
Bytes per
sector
M.2 128G SSD
520MB/s
480MB/s
1024KB
250069280
512Byte
M.2 256G SSD
550MB/s
490MB/s
1024KB
500118192
512Byte
M.2 512G SSD
550MB/s
500MB/s
1024KB
1000215216
512Byte