4.11 4.11 LCD Module Mask 4 Replacement
Procedures
4-28 Maintenance Manual Satellite C50-H/C40-H
Installing the LCD Module Mask
Install the LCD Module Mask according to the following procedures and Figure 4-27 &
4-28.
1. Install the LCD Module Mask and follow step 3, 2 & 1 to press & lock the latches.
2. Securing the LCD Module Mask with four M2.0x3.0x4.5 black Phillips head screw.
3. Install 4 rubber foot pads Install four plastic pads.
NOTE: When installing the LCD Module Mask, ensure there is no gap between the LCD
Module Mask and the LCD module cover.
NOTE: Do not lose the Camera Shutter.
To Next Page
Loading...
