NO.
CONT.ON 14 PAGE NO.13
3-3-3 Test setting and Result [Rev02]
TEST Item Select the check boxes for the items to be tested.
Status The following table explains the status of each test item (test device).
Status Explanation
-- Ready for the test prior to the start of it.
TESTING The test is running.
SKIP The test was skipped.
DONE The test finished
***************
Grayed out.
The test item cannot launch as the current environment is not suitable for
running the item. Refer to the table below for details.
Note: Grayed-out test items
A test item will be grayed out if the environment is not good enough for the test.
In that case, the “Status” will be shown as follows:
Status (when grayed out) Explanation
Device is not equipped The PC does not equip the device for the test.
Test item Status
Test result
Pass
Error
To Next Page
Loading...
