dynabook SATELLITE PRO C50-H - Utilities and Advanced Usage; System Utilities

NO.
CONT.ON 22 PAGE NO.21
Copyright (C) 20
20
Dynabook Inc., All Right
s
Reserved.
As above message box appears, select [Yes] or [No] button depending on your judgment based on the confirmed result previously.
If you click [Yes] here, the test will be “Pass”. If you click [No], the “LED Test” will be recognized as “NG”.
■ In case of PASS
“OK” is shown in the “Result” field on the “Diagnostics” dialog.
■ In case of FAIL
“NG” is shown in the “Result” field on the “Diagnostics” dialog.
4-1-3 TOUCH PAD Test
1) Test contents
This test checks if the touch pad works properly.
2) Test screen
Check method:
a. Left-click all the circles with the touch pad.
b. Right-click to display an end window when you clicked all the circles.
c. Click OK or NG button depending on your judgment.
3) Test Result
Select [OK] or [NG] button depending on your judgment based on the result on the “TOUCH PAD Test” window.
If you click [OK] here, the test will be “Pass”. If you click [NG], the “TOUCH PAD Test” will be recognized by “ERR”.
■ In case of PASS
“OK” is shown in the “Result” field on the “Diagnostics” dialog.
■ In case of FAIL
“NG” is shown in the “Result” field on the “Diagnostics” dialog.
4) Test file
TouchPad.exe: Test program.