Dynacord AXM 12A User Manual

Installation
Floor monitor
When using the DYNACORD AXM 12A as a floor monitor, make sure to:
• Place the speaker on a level, stable surface that is solid and secure.
• Route cables so that performers, production crew and audience members will not trip
over the cables. Secure cables with wire ties or tape whenever possible.
Tripod
The AXM 12A loudspeaker includes a 35 mm (1-3/8 in) stand mount to allow mounting on
tripod stands or above a subwoofer. Make sure to:
• Check the specifications of the speaker stand to be certain it is capable of supporting the
weight of the speaker.
• Check that the speaker stand is placed on a flat, stable surface and be sure to fully
extend the legs of the stand. Do not try to make the stand “taller” and compromise its
structural integrity.
• Route cables and position the stand so that performers, production crew and audience
members will not trip over the stand or cables and pull the speaker system over. Secure
cables with wire ties or tape whenever possible.
• Do not attempt to suspend more than one speaker on a stand designed for a single
speaker.
• Unless you are confident that you can safely handle lifting the weight of the speaker onto
the stand, ask another person to help you place it.
4
4.1
4.2
8 en | Installation AXM 12A
18-Mar-14 | 02 | F01U290507 User manual Bosch Sicherheitssysteme GmbH

Dynacord AXM 12A Specifications

General

XLR out	2
AC (power) in	Yes
Audio (L/R) in	1
Frequency range	50 - 20000 Hz
Product color	Black
Rack mounting	No
Volume control	Rotary
Housing material	Plywood
RMS rated power	520 W
Woofer diameter (imperial)	12 \
Tweeter diameter (imperial)	1.75 \
Display type	LCD
Operating temperature (T-T)	0 - 40 °C
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	484 mm
Width	414 mm
Height	339 mm
Weight	14900 g
Package weight	18400 g