Need help?Do you have a question about the Dynacord L1000 and is the answer not in the manual?
Describes gain controls and LED status indicators for power, signal, and protection.
Details the power switch operation and its delayed relay activation to prevent audible startup transients.
Details XLR inputs, electronic balancing, input sensitivity, and PARALLEL/DUAL STEREO modes.
Describes SPEAKON output connectors for channels A/B and the Bridged Out connector.
Explains adjustable limiter, HI-LO-CUT filters, and the groundlift switch function.
Describes gain controls and LED status indicators for power, signal, and protection.
Details the power switch operation and its delayed relay activation to prevent audible startup transients.
Details XLR inputs, electronic balancing, input sensitivity, and PARALLEL/DUAL STEREO modes.
Describes SPEAKON output connectors for channels A/B and the Bridged Out connector.
Explains adjustable limiter, HI-LO-CUT filters, and the groundlift switch function.
General| Total Output Power | 1000 W |
|---|---|
| Weight | 13.1 kg |
| THD+N | <0.1% |
| Protection | DC |
| Connectors Input | XLR |
| Connectors Output | Speakon |
| Dimensions (W x H x D) | 483 x 88 mm |
| THD | <0.1% |
To Next Page
