Need help?Do you have a question about the DynaGen TOUGH TG350 and is the answer not in the manual?
Lists key features, warranty, protocol support, and operational benefits of the TOUGH Series controllers.
Provides essential guidelines for safe and effective controller wiring, including wire gauge, length, and fusing.
Details controller modes (OFF, Auto, Running) and various engine starting methods.
Explains cranking behavior, cooldown mode operation, and interaction with start/stop commands.
Lists and describes system warnings and failures that alert users or cause engine shutdowns.
Details the configuration of five switched inputs for custom functions, warnings, and failures.
Addresses problems with engine starting, specifically when the crank output fails to turn off.
Explains 'Failure To Stop' conditions and how to configure Energize to Stop settings.
General| Operating Temperature | -40°C to +85°C |
|---|---|
| Storage Temperature | -40°C to +85°C |
| Modbus RTU | Yes |
| Model | TG350 |
| Display Type | 128x64 Graphic LCD |
| Communication Protocol | Modbus RTU |
| CANbus | Yes |
| SAE J1939 | Yes |
| Display | 128x64 Graphic LCD |
| Input Voltage | 8-35V DC |
| Supply Voltage | 8-35V DC |
To Next Page
