Need help?Do you have a question about the DynaGen Tough TG350AMF and is the answer not in the manual?
Essential safety warnings and precautions for installing the generator controller, emphasizing electrical safety.
Step-by-step instructions and criteria for physically mounting the controller unit securely and safely.
A comprehensive diagram illustrating typical wiring connections for the controller and its associated components.
Overview of controller states (Off, Auto, Running, Failure) and methods for starting and stopping the generator.
Settings that control how the generator starts, stops, and sequences operations using delays and timers.
Configuring switched outputs to activate under specific conditions, tied to battery voltage.
Configuration of analog sensor inputs for monitoring parameters like oil pressure and temperature.
Monitoring generator and mains AC voltage, frequency, and calibration settings.
General| Model | TG350AMF |
|---|---|
| Category | Controller |
| Storage Temperature | -40°C to +85°C |
| Alternator Frequency | 50 - 60 Hz |
| Current Consumption | < 50 mA |
| Protection Features | Reverse polarity protection |
To Next Page
