Dynamic DX2-REM551 - Page 60

60 GBK60348: Issue 3
Lighting Menu 4.2.1.8
Parameter
Possible Values
Default
HHP
Lite
Std
Adv
Lighting Menu
Yes/No
Yes
-



This parameter can show or hide the Lighting Mode (see section 2.5.5) from the
accessory menu list (see section 0).
Yes - The Lighting menu is present in the accessory list.
No - The Lighting menu is hidden from the accessory list.
ECU Menu 4.2.1.9
Parameter
Possible Values
Default
HHP
Lite
Std
Adv
ECU1 CH1-6 Mouse Mode
Menu
Yes/No
Yes
-



ECU1 CH7 (Alarm) Menu
Yes/No
Yes
-



ECU1 CH8 Menu
Yes/No
Yes
-



ECU2 CH9-16 Menu
No
CH9
CH9 to 10
…
CH9 to 16
CH9 - 16
-



This parameter can show or hide the different ECU channels of the ECU Mode (see
section 2.5.6 and 2.5.7) from the accessory menu list (see section 0).
Yes - The ECU channel is present in the ECU menu list.
No - The ECU channel is hidden from the accessory list.
If all the ECU parameters have the value ‘No’, the ECU menu will not be available in
the accessory menu list.
Mode Change Beep 4.2.1.10
Parameter
Possible Values
Default
HHP
Lite
Std
Adv
Mode Change Beep
Yes/No
No
-



If this parameter has the value 'Yes', the AJR will produce an audible beep on the
following instances:
 Power on
 Power off
 Lock
 Unlock
 Sleep
 Drive Profile change
 Accessory menu change