Long-Term Care Bed • D100 (Reorder No. 12001) 7
1. UNPACKING THE BED
1. Unpack the components from the shipping
cartons.
2. Remove any black zip ties holding the components
to the Bed Assembly. White zip ties should not be
removed.
3. Upon unpacking your bed, the package should
contain all the components shown below.
4. Inspect the bed components for damage. If the
bed is damaged, do not use the bed and contact
the manufacturer.
ASSEMBLY INSTRUCTIONS
Bed Assembly × 1 Head/footboard
Insertion Plate × 4
Wall Bumper Bar × 1
Allen Wrench (size 5 mm)
NOT INCLUDED
Wrench × 1
M10 Hex Bolt × 8Mattress Retainer × 6
To Next Page
Loading...
Need help?
General
