Dynaudio 18S - Installation; Positioning

23
Control and conguration
With the 18S subwoofer positioned in
the listening room and connected to
signal cables and mains power it can be
switched on via the mains switch above
the mains input socket on the rear panel.
The 18S must be congured
appropriately for the monitoring system
and main speakers with which it is to
be used. This is achieved via the rotary
controller, display and menu based
interface on the rear panel. Turn the
rotary controller to select conguration
parameters and press the control to
select options.
Note
If multiple subwoofers are
employed they should be
congured identically.
22
Control and conguration