Core Update Tool – Core 7 detected
▪ Next, download the latest firmware by clicking the “Download latest
firmware” button.
▪ Once the download has finished, the message “Download successful” will
appear in the update file field. You are now ready to upload the latest
firmware into your Core monitor. Ensure that during this process the power
is not disconnected at any time, or permanent damage may occur to your
monitor.
▪ Click the Update button. A progress bar will appear showing the status of
the upload.
▪ Once the upload has finished, you can simply disconnect the USB cable,
and your Core monitor is ready to use.
▪ If you are updating multiple monitors, click “Next speaker” to continue.
Updating the firmware 27
To Next Page
Loading...
