Need help?Do you have a question about the Dynaudio Contour and is the answer not in the manual?
General| Sensitivity | 87 dB (2.83V / 1m) |
|---|---|
| Type | 3-way bass reflex |
| Impedance | 4 Ohms |
| Crossover Frequencies | 2200 Hz |
| Midrange | 15cm MSP |
| Tweeter | 28 mm |
| Woofer | 17cm MSP cone |
Listening to high sound pressure levels over a longer period may harm your hearing.
Indicates potentially hazardous situations that could result in minor injury or equipment damage.
Suggestions for optimal loudspeaker placement to achieve an isosceles triangle and good stereo imaging.
Position speakers at least 0.5 meters from walls to avoid negative reflections and maintain sound quality.
Use foam plugs to minimize low frequency reflections and adapt to room acoustics.
Spikes may cause injuries and damage surfaces; use plates to protect the floor.
New loudspeakers require weeks of playing to reach optimum performance; brief warm-up before listening.
Can be driven with high power levels; use high-quality amplifiers to avoid distorted signals and damage.
Distorted signals from weak, defective, or overloaded amplifiers can damage loudspeakers; use quality amplifiers within specified ratings.
To Next Page
