Dynaudio Focus XD Series User Manual

Placement
Power to speakers
Connect speakers
Select INPUT or
DIRECT In
Unpack the speakers and
place them in the room.
Connect power to the speakers,
using the power cable and by
turning the switch to “I”.
Connect source outputs to inputs
on speakers.
Switch to master and slave.
For support of resolution up to
24bit/192kHz, a coax cable connection
must be applied between master digital
output and slave digital input.
Point the remote towards
the speaker and select INPUT
or DIRECT In.
Subject to change without notice.
Please note that the latest version of this manual is available on dynaudio.com
Do you have questions or want to give your feedback?
Please visit dynaudio.com/support
I
O
First time
Setup
Enjoy the crystal
clear sound
Focus XD
1
2
3
4
3816_DYN_Focus_XD_Setup_V2.indd 1 15/12/2016 11.31

Dynaudio Focus XD Series Specifications

General

Brand	Dynaudio
Model	Focus XD Series
Category	Speakers
Language	English

Summary

First Time Setup Guide

Placement

Unpack the speakers and place them in the room.

Power to Speakers

Connect power to the speakers and turn the switch to "I".

Connect Speakers

Connect source outputs to speaker inputs and switch to master/slave.

Select Input or Direct In

Use the remote to select INPUT or DIRECT In on the speaker.

Important Safety Instructions

General Safety Precautions

Read and follow all safety instructions for apparatus usage and maintenance.

Electrical Shock Warning

Warning: Risk of electric shock. Do not open or expose to rain or moisture.

Handling and Disposal

Instructions for unpacking, checking for damage, and proper disposal of equipment.

Remote Control and Battery

Guide to using the remote control, inserting batteries, and battery safety.

Product Safety Information

Safety warnings for loudspeakers, transmitter power supply unit, and battery.

Regulatory Compliance

FCC, CE, and Industry Canada compliance statements and interference guidelines.