Need help?Do you have a question about the Dynaudio LYD and is the answer not in the manual?
General| Tweeter Type | Soft Dome |
|---|---|
| Type | Nearfield Monitor |
| Frequency Response | 45Hz - 22kHz |
| Inputs | XLR |
| Woofer Size | 7 inches |
| Position | Nearfield |
Lists essential items for setting up and using the speakers.
Mentions optional accessories or software for enhanced functionality.
Introduces a dedicated iOS app for speaker calibration and testing.
Provides critical safety alerts and general precautions for operating the equipment.
Outlines procedures for professional servicing and environmentally responsible disposal.
Details electromagnetic compatibility standards and Canadian regulatory compliance.
Describes the integrated amplifier and details the functions of the speaker's backplate controls and inputs.
Defines the acoustic axis for speaker placement and measurement.
Explains how room surfaces affect sound and provides placement guidelines.
Recommends optimal distances between speakers and listener for best audio performance.
Discusses placement on desks, using stands, and subwoofer integration.
Covers adjusting the vertical and horizontal angles for optimal sound projection to the listener.
Guides on connecting the power cable and verifying power-up.
Explains the auto-standby feature for energy conservation.
Details available audio inputs (XLR, RCA) and connection recommendations.
Advises on setting sensitivity and volume levels to prevent overload.
Explains the three-position switch for optimizing input sensitivity based on audio source.
Describes the DSP setting for adjusting low-frequency response and output volume.
Details the tilt filter settings for adjusting the speaker's overall tonal balance.
Explains the DSP switch for compensating speaker placement near walls.
Suggests using familiar audio recordings for subjective listening evaluations.
Guides on using pink noise and metering tools for objective speaker response testing.
Advises on managing sound reflections from surfaces to improve imaging and response.
Explains how to address room modes and improve low-frequency response using bass traps.
To Next Page
