EasyManua.ls Logo

Dynaudio LYD 5 User Manual

Dynaudio LYD 5
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LYD Series
Operation Manual
Question and Answer IconNeed help?

Do you have a question about the Dynaudio LYD 5 and is the answer not in the manual?

Dynaudio LYD 5 Specifications

General IconGeneral
TypeActive Studio Monitor
Frequency Response50 Hz - 22 kHz
Amplifier Power50W LF / 50W HF
InputsXLR, RCA
Max SPL106 dB
Driver Size5 inch
Weight5.4 kg
Tweeter Size1 inch

Summary

Introduction to Dynaudio LYD Series

Dynaudio Meter App

iOS app with pink noise, SPL meter, and RTA spectrum analyzer for speaker calibration.

Important Safety Information

General Safety Instructions

Includes 14 key instructions for safe operation, handling, and placement of the apparatus.

Product Warnings and Service

Covers operational warnings, service requirements, and disposal guidelines for electrical equipment.

Positioning the Speakers

Connecting the Speakers

Adjusting the Volume

Input Sensitivity Settings

Three-position switch (+6dB, 0dB, -6dB) to optimize input sensitivity based on audio source output level.

DSP Settings for Sound Tailoring

Bass Extension Control

Adjusts low frequency range (-10 Hz, 0 Hz, +10 Hz), affecting extension vs. maximum volume output.

Sound Balance Tilt Filter

A tilt filter (Bright, Neutral, Dark) to adjust overall tone by ±1.5dB at frequency extremes.

Related product manuals