Dynaudio LYD Series - User Manual

LYD — Series
Operation Manual

Dynaudio LYD Series Specifications

General

Inputs	XLR, RCA
Type	Studio monitor
Tweeter Size	1.1"
Sound Balance	Neutral
Amplifier Power (Tweeter)	50W (all models)

Summary

Important Safety Information

General Safety Instructions

Lists 14 numbered safety instructions for safe operation and maintenance.

Safety Information and Compliance

Warnings and Cautions

Highlights critical warnings and cautions regarding equipment usage and risks.

Service and Regulatory Compliance

Details service requirements and EMC/EMI compliance for regulatory adherence.

LYD Speaker Components

Integrated Amplifier

Details the Class-D amplifier with analog inputs and backplate connections.

Positioning the Speakers

Room Boundaries and Placement

Listening Angle and Alignment

Horizontal Angle Setup

Vertical Angle Adjustment

Connecting The Speakers

Mains Power Connection

Audio Input Signal Options

Input Sensitivity Caution

Advises setting sensitivity to -6 dB and low output levels to prevent overload.

Adjusting The Volume

Input Sensitivity Settings

Explains the three-position switch for optimizing gain staging based on output levels.

DSP Settings

Bass Extension Control

Adjusts low-frequency extension and maximum output volume (-10 Hz, 0 Hz, +10 Hz).

Sound Balance Tilt Filter

Fine-tunes speaker tone (Bright, Neutral, Dark) based on room acoustics.

Rear Wall Position Setting

Listening Tests

Subjective Listening Tests

Objective Pink Noise Analysis

Details using pink noise and RTA for objective speaker response testing.