Need help?Do you have a question about the Dynaudio Sub 6 and is the answer not in the manual?
General| Subwoofer type | Active subwoofer |
|---|---|
| Number of subwoofers | 2 |
| Subwoofer peak power | 500 W |
| Subwoofer driver diameter | 240 mm |
| Subwoofer frequency range | 16 - 230 Hz |
| On/off switch | Yes |
| Product color | Black |
| Speaker enclosure | Closed |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
Weight and Dimensions| Subwoofer depth | 268 mm |
|---|---|
| Subwoofer width | 447 mm |
| Subwoofer height | 300 mm |
| Subwoofer weight | 21500 g |
Explains safety icons and defines signal words for warnings and notices.
Outlines the manual's sections: Unpacking, Installation, Configuration and Use.
Key features and design of the Dynaudio Sub 6.
Steps for unpacking, carton contents, and disposal.
Guides for subwoofer placement, room acoustics, and multi-subwoofer setup.
Explains signal processing for time delay and volume compensation.
Instructions for fitting rubber feet or spikes.
Connecting mains power and balanced/unbalanced audio sources.
Connecting main speakers, trigger input, and illustrating common connection setups.
Details on using the rotary controller and navigating configuration menus.
Input sensitivity, presets, phase, PEQ, speaker distance, and maintenance.
Diagnosing and resolving power, sound, auto-on, and volume problems.
Steps and prerequisites for updating the subwoofer firmware.
To Next Page
