Unpacking
1. Open the carton from the top and remove the subwoofer accessories. Do not remove the upper element of the internal
packaging.
2. Carefully rotate the carton on to its side and again to turn it upside-down.
3. The carton can now be lifted away from the subwoofer. Remove the lower internal packaging now on top to reveal the
underside of the subwoofer.
4. Open the plastic bag and remove it from around the base of the subwoofer.
5. Carefully rotate the subwoofer on to its side and again to turn it onto its feet. The internal packaging can now be removed
followed by the plastic bag.
After unpacking, make sure the components are complete and check the subwoofer and all accessories for
transport damage. Transport damage may be expected if the packaging is severely marked. Do not attempt to
install the subwoofer if it is damaged. If the contents are incomplete or damaged, please contact your Dynaudio
retailer or local distributor. Distributor addresses can be found at: www.dynaudio.com.
Packaging material
The packaging has been designed so that it may be reused if it was not damaged during initial transport. Keep
the packaging and use it for all further transport.
Note
The Sub 6 is heavy and is best unpacked close to its installed location by two people working together.
Disposal
Disposal of used electrical and electronic equipment (applicable in European countries with separate collection
systems for this equipment).
This symbol on the product or its packaging indicates that the product may not be treated as household waste.
Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative
Unpacking 11
To Next Page
Loading...
Need help?
General
Weight and Dimensions
