Dynaudio LYD Series - Connecting The Speakers; Mains Power Connection; Audio Input Signal Options; Input Sensitivity Caution

P17
Connecting SpeakersPersonal Reference Monitor
There is a three-position switch that adjusts the
input sensitivity for the loudspeaker.
Depending on the output level of your audio mixer,
interface, or monitor control system, you can
choose a setting that optimizes the gain staging
into the loudspeaker.
• +6dB = 0dBu /.775V max
• 0dB = +6dBu /1.5V max
• -6dB = +12dBu /3.1V max
If you are using a professional interface with a max
output of +20dBu or more, then a setting of -6dB
on the loudspeaker is the most appropriate. If you
are using equipment that runs at a consumer or
domestic output level (-10dBV nominal), then
the +6dB setting is better.
Adjusting
The
Volume