Adjusting the Volume
There is a three-position switch that adjusts the input sensitivity for the loudspeaker.
Depending on the output level of your audio mixer, interface, or monitor control system, you can choose a setting
that optimizes the gain staging into the loudspeaker.
▪ +6dB = 0dBu /.775V max
▪ 0dB = +6dBu /1.5V max
▪ -6dB = +12dBu /3.1V max
If you are using a professional interface with a max output of +20dBu or more, then a setting of -6dB on the
loudspeaker is the most appropriate. If you are using equipment that runs at a consumer or domestic output level
(-10dBV nominal), then the +6dB setting is better.
18 LYD User manual
To Next Page
Loading...
