Dyness LV-Link A - Page 10

LV-Link A User Manual
©Dyness reserves the copyright of this document
8
DIP Switch Description
2. When the battery works with GOODWE, Solis, LUX, Sofar, DEYE(Sunsynk),
VICTRON, IMEON, Sungrow, SMA, RENAC, DELIOS, SAJ(CAN Comm) before
starting the battery, you need to put LV-Link DIP switch "# 3" to the "ON" position
(to the top), then turn on the batteries.
3. If the battery communicates with the Axpert-king/VMIII/MAX, Infinisolar,
Growatt SPH/SPA(CAN comm) GMDE, turn the LV-Link DIP switch "#2" to "ON"
position.
4. If the battery communicates with the Growatt SPF HVM-P/ES/WPV by RS485
communication, turn the LV-Link DIP switch "#2" and "#3" to "ON".
5. If the battery communicates with the Schneider Conext Series, turn the LV-Link
DIP switch "#1" and "#3" to "ON".
6. When you setup the LV-Link DIP as setting 1~4, all the PowerBox Pro or
PowerDepot H5B keep the DIP 0010,no need to change.
Note: For more information of matching inverter brands, please subject to the latest
document
<The list of compatibility between Dyness ESS and Inverters >.
LV-Link Setting 1
LV-Link Setting 2
LV-Link Setting 3
LV-Link Setting 4