Emptying your bin
Empty as soon as the dirt reaches the MAX level – don’t overfill. Using your
machine when the dirt is above the MAX line may affect the performance
and require more frequent filter washing.
Close the bin
Push down on the cyclone until it slides into position.
Push the bin base upwards until it closes securely.
Release the dirt
Hold your machine over the bin and pull the bin release catch upwards.
The cyclone will slide up and the bin base will open.
Minimise dust contact
Cover your bin tightly in a dustproof bag while you empty.
Remove the bin carefully, seal the bag tightly and dispose.
clik
The bin release catch
is located on the top
of the cyclone where it
joins the main body of
your machine.
The MAX mark on the bin
of the machine, showing
that the dirt should not be
filled over the Max mark
when the machine is at
the angle of normal use.
To Next Page
Loading...
