Twist off your filter
Twist your filter anti-clockwise and pull it away from your machine.
Wash your filter
Wash the inside of the filter under cold, running water, rotating the filter
to make sure all the inside is clean.
Repeat until the water runs clear.
Shake out the water
Empty the filter and shake firmly to remove excess water.
Keep shaking it until there’s no water coming from the filter.
Washing filter B
Dry your filter
Place your filter, with the open end facing up, to dry.
Leave your filter to dry completely, for at least 24 hours in a well-ventilated,
warm place.
Do not dry your filter in a tumble-dryer or near a naked flame.
Important: your filter must be completely dry before you put it back into the
machine. Your machine could be damaged if used with a damp filter.
Replace your filter
Place your filter on your machine, aligned in the open position.
Twist clockwise until it clicks securely into position.
The filter is placed
under the tap with the
water flowing into the
open end of the filter
Alt text alt tex alt tex alt
tex alt tex alt tex alt tex
Alt text alt tex alt tex alt
tex alt tex alt tex alt tex
To Next Page
Loading...
