Service manual
Fitting notes
58
Sub-assemblies - Wand/Hose assembly
128 To replace the handle cover
assembly or batteries undo the
Philips screw and remove the
handle.
129 When replacing the batteries
ensure they are fitted correctly
and aligned with the connections.
Fit the cover and Philips screw.
Note: If the handle cover
assembly has been replaced the
product must be tuned. See the
Tuning section (page 8) for
details.
130 The swivel catch can be removed
from the end of the hose or
wand by prising off with a thin,
flat bladed screwdriver.
Models with finger
tip controls only
Models with finger
tip controls only
To Next Page
