Dyson Pure Cool TP04 Operating Manual

clik
x2
clik
x2
x2
x2
x2
x2
x2
x2
click
click
4 5 6 7
5
sec
21
Plug the appliance in to the mains
electricity supply and switch on.
Press and hold the Night mode
button on the remote control.
The display on the appliance will
countdown from five, finishing with
the default screen. The glass HEPA
filter level will be reset and the
appliance is ready to use.
Push the new glass HEPA filters
into the shrouds until secure.
Push the shrouds until they click back
into position in the base.
Important

Dyson Pure Cool TP04 Specifications

General

Type	Tower
Filter Type	HEPA and Activated Carbon
Air Multiplier Technology	Yes
Oscillation	350 degrees
Wi-Fi Connectivity	Yes
Fan Speed	10 settings
Night Mode	Yes
Display	LCD
App Compatibility	Dyson Link App
Air Projection	Yes
Filter Life	Up to 12 months
Voltage	120V
Voice Control	Yes
Room Size	Up to 81 m²
Power Consumption	40 W